Hot Tub and Pool Use Guidelines

Welcome! Please read these instructions carefully to ensure a safe and enjoyable experience with the hot tub and pool. If you have any questions or concerns, don’t hesitate to reach out.

Pool Cover Maintenance Pump Usage:

The pool cover features a pump for rainy weather. Guests have two options:

Hot Tub Only: If you plan to use only the hot tub, leave the pump on the cover and open the pool cover just enough to expose the hot tub.

Pool Use: If you plan to use the pool (unheated), remove the pump before use and ensure it is replaced on the cover at the end of your stay.

Accessing the Pool Cover The key to open the pool cover is located on the post by the pathway between the house and the pool.

Code: 1973

The opening mechanism is also on the post.

Hot Tub Operation Controls Location: The hot tub controls are on the wall nearest the “pool house.”

Button Functions:

Power Button: Turns the hot tub on and off.

Light Button: Activates the spa lights.

Jet Button: Controls additional jets. The spa features 8 jets—4 activate with the spa, and the other 4 can be turned on separately.

Boost Button: Raises the water temperature by an additional 2°F.

Temperature Settings: The hot tub is preset to a maximum temperature of 102–104°F.

Heating Time:

Summer: The hot tub takes approximately 30-45 minutes to heat up.

Winter: Heating may take longer due to lower starting temperatures.

Automatic Shut-Off: The hot tub shuts off automatically after 3 hours but can be restarted.

Retaining Heat: Close the cover when the hot tub is not in use to conserve heat.

End-of-Stay Instructions Before departing, please:

Turn off the hot tub and lights.

Close the cover completely.

Return the key to the lockbox.

Place the pump back on the pool cover.

Thank you for adhering to these guidelines. We hope you have a wonderful stay!